Markets

Products A to Z

Goetze Safety Relief Valves

Goetze Safety Relief Valves

 

Goetze Valves are a German company that has been designing and manufacturing safety valves for a highly diversified range of applications for over 60 years.

810 – Goetze Atmospheric Discharge Brass Safety Relief Valve

The 810 safety relief valve is suitable for the protection of pressure tanks and systems for air and inert gas applications. The valve has a high discharge capacity making it possible to use this small and inexpensive safety relief valve, even for large pressure tanks. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Atmospheric Discharge suitable for air compressor duties
Size & Connections
6mm (1/4″) to 50mm (2″) BSP
Duty
Air Compressors & Systems • Inert Gases
Materials
Brass Body • FKM Seat Seal (<25 bar) • PTFE Seat Seal (25> bar)
Set Pressure Range
6mm-25mm : 0.2 to 50 bar • 32mm-50mm : 0.2 to 16 bar
Temperature
FKM Seal : -20°C t 200°C • PTFE Seal : -60°C to 225°C
Compliance & Approvals
BS6759 Part 2 • TÜV • BSEN ISO 4126
Buy 810 – Goetze Atmospheric Discharge Brass Safety Relief Valve810 – Goetze Atmospheric Discharge Brass Safety Relief Valve - PDF DatasheetCertificated to BS6759 StandardsTUV Test ApprovalGoetze Valves

810 – Goetze Atmospheric Discharge Brass Safety Relief Valve

812 – Goetze Atmospheric Discharge High Performance Brass Safety Relief Valve

The 812 is a quality, high performance safety relief valve suitable for the protection of pressure tanks and systems for air and inert gas applications. This valve has a high discharge rate making it suitable for high capacity applications. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Atmospheric Discharge suitable for air compressor duties
Size & Connections
15mm (1/2″) to 50mm (2″) BSP
Duty
Air Compressors & Systems • Inert Gases
Materials
Brass Body • FKM Seat Seal (<30 bar) • PTFE Seat Seal (30> bar)
Set Pressure Range
15mm-40mm : 0.2 to 50 bar • 50mm : 0.2 to 30 bar
Temperature
FKM Seal : -20°C to 200°C • PTFE Seal : -60°C to 225°C
Compliance & Approvals
BS6759 Part 2 • TÜV • BSEN ISO 4126
Contact Us812 – Goetze Atmospheric Discharge High Performance Brass Safety Relief Valve - PDF DatasheetCertificated to BS6759 StandardsTUV Test ApprovalGoetze Valves

812 – Goetze Atmospheric Discharge High Performance Brass Safety Relief Valve

813 – Goetze Atmospheric Discharge With Safety Shroud Brass Safety Relief Valve

The 813 is a quality, high performance safety relief valve suitable for the protection of pressure tanks and systems for air and inert gas applications. The valve has a shroud fitted which provides extra safety when relieving media with liquid, granular or dusty particles. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Atmospheric Discharge • Safety Stroud
Size & Connections
15mm (1/2″) to 50mm (2″) BSP
Duty
Air Compressors & Systems • Inert Gases • Granula & Dusty Media
Materials
Brass Body • FKM Seat Seal (PTFE option)
Set Pressure Range
0.2 to 6 bar
Temperature
FKM Seal : -20°C to 200°C • PTFE Seal : -60°C to 225°C
Compliance & Approvals
BS6759 Part 2 • TÜV • BSEN ISO 4126
Contact Us813 – Goetze Atmospheric Discharge With Safety Shroud Brass Safety Relief Valve - PDF DatasheetCertificated to BS6759 StandardsTUV Test ApprovalGoetze Valves

813 – Goetze Atmospheric Discharge With Safety Shroud Brass Safety Relief Valve

652 – Goetze Side Discharge Bronze Safety Relief Valve

The 652 safety relief valve is suitable for the protection of pressure tanks and systems for steam, air, inert gas and vapour duties. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Side Discharge • Twist Lifting Mechanism
Size & Connections
15mm (1/2″) to 50mm (2″) BSP
Duty
Air • Inert Gases • Steam
Materials
Bronze Body • NBR Disc (EPDM & FKM option)
Set Pressure Range
1 to 16 bar
Temperature
NBR Disc : -30°C to 130°C • EPDM Disc : -50°C to 150°C • FKM Disc : -20°C to 200°C
Compliance & Approvals
BS6759 • TÜV Test Approval 293, 312 • BSEN ISO 4126
Contact Us652 – Goetze Side Discharge Bronze Safety Relief Valve - PDF DatasheetCertificated to BS6759 StandardsTUV Test ApprovalGoetze Valves

652 – Goetze Side Discharge Bronze Safety Relief Valve

412 – Goetze Atmospheric Discharge High Performance Stainless Steel Safety Relief Valve

The 412 is a quality, high performance safety relief valve suitable for the protection of pressure tanks and systems for air and inert gas applications. This valve has a high discharge rate making it suitable for high capacity applications. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Atmospheric Discharge suitable for air compressor duties
Size & Connections
15mm (1/2″) to 50mm (2″) BSP
Duty
Air Compressors & Systems • Inert Gases
Materials
Stainless Steel Body • FKM Seat Seal (<30 bar) • PTFE Seat Seal (30> bar)
Set Pressure Range
15mm-40mm : 0.2 to 50 bar • 50mm : 0.2 to 30 bar
Temperature
FKM Seal : -20°C to 200°C • PTFE Seal : -60°C to 225°C
Compliance & Approvals
BS6759 Part 2 • TÜV • BSEN ISO 4126
Contact Us412 – Goetze Atmospheric Discharge High Performance Stainless Steel Safety Relief Valve - PDF DatasheetCertificated to BS6759 StandardsTUV Test ApprovalGoetze Valves

412 – Goetze Atmospheric Discharge High Performance Stainless Steel Safety Relief Valve

413 – Goetze Atmospheric Discharge With Safety Shroud Stainless Steel Safety Relief Valve

The 413 is a quality, high performance safety relief valve suitable for the protection of pressure tanks and systems for air and inert gas applications. The valve has a shroud fitted which provides extra safety when relieving media with liquid, granular or dusty particles. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Atmospheric Discharge • Safety Stroud
Size & Connections
15mm (1/2″) to 50mm (2″) BSP
Duty
Air Compressors & Systems • Inert Gases • Granula & Dusty Media
Materials
Stainless Steel Body • FKM Seat Seal (PTFE option)
Set Pressure Range
0.2 to 6 bar
Temperature
FKM Seal : -20°C to 200°C • PTFE Seal : -60°C to 225°C
Compliance & Approvals
BS6759 Part 2 • TÜV • BSEN ISO 4126
Contact Us413 – Goetze Atmospheric Discharge With Safety Shroud Stainless Steel Safety Relief Valve - PDF DatasheetCertificated to BS6759 StandardsTUV Test ApprovalGoetze Valves

413 – Goetze Atmospheric Discharge With Safety Shroud Stainless Steel Safety Relief Valve

355 – Goetze Cast Iron Safety Relief Valve – Flanged

The Goetze 355 safety relief valve has a cast iron body with various seal options. This valve can be supplied either with open or closed cap. There is also an option with a bellows assembly. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Side Discharge • Lever or Dome Top • Optional Bellows
Size & Connections
DN15 to DN100 • Flanged PN40 x 16
Duty
Air • Oil • Inert Gasses • Steam • Water
Materials
Cast Iron Body & Spring Housing • St. St. Disc (EPDM, FKM, FFKM & PTFE option)
Set Pressure Range
0.2 to 40 bar
Temperature
Stainless Steel Disc : -10°C to 350°C (see datasheet for other materials)
Compliance & Approvals
TÜV Test Approval 2094 • BSEN ISO 4126-1
Contact Us355 – Goetze Cast Iron Safety Relief Valve - Flanged- PDF DatasheetTUV Test ApprovalGoetze Valves

355 – Goetze Cast Iron Safety Relief Valve - Flanged

852 – Goetze Bronze Safety Relief Valve – Flanged

The Goetze 852 safety relief valve has a bronze body with various seal options making it suiatble for various duties inluding seawater. This valve can be supplied either with open or closed cap. There is also an option with a bellows assembly. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Side Discharge • Lever or Dome Top • Optional Bellows
Size & Connections
DN15 to DN100 • Flanged PN40 x 16
Duty
Air • Oil • Inert Gasses • Seawater • Steam • Water
Materials
Bronze Body & Spring Housing • NBR Disc (SS, EPDM, FKM, FFKM & PTFE option)
Set Pressure Range
0.5 to 25 bar
Temperature
NBR Disc : -30°C to 130°C (see datasheet for other materials)
Compliance & Approvals
TÜV Test Approval 2007 • BSEN ISO 4126-1
Contact Us852 – Goetze Bronze Safety Relief Valve - Flanged- PDF DatasheetTUV Test ApprovalGoetze Valves

852 – Goetze Bronze Safety Relief Valve - Flanged

455 – Goetze Stainless Steel Safety Relief Valve – Flanged

The Goetze 355 safety relief valve has a stainless steel body with various seal options. This valve can be supplied either with open or closed cap. There is also an option with a bellows assembly. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Side Discharge • Lever or Dome Top • Optional Bellows
Size & Connections
DN15 to DN100 • Flanged PN40 x 16
Duty
Air • Oil • Inert Gasses • Steam • Water
Materials
St. St. Body & Spring Housing • St. St. Disc (EPDM, FKM, FFKM & PTFE option)
Set Pressure Range
0.2 to 40 bar
Temperature
Stainless Steel Disc : -60°C to 400°C (see datasheet for other materials)
Compliance & Approvals
TÜV Test Approval 2094 • BSEN ISO 4126-1
Contact Us455 – Goetze Stainless Steel Safety Relief Valve - Flanged- PDF DatasheetTUV Test ApprovalGoetze Valves

455 – Goetze Stainless Steel Safety Relief Valve - Flanged

2400– Goetze Stainless Steel Safety Relief Valve – Cryogenic & Food Duty

The 2400 full lift safety relief valve is designed for high capacity pressure relief of cryogenic fluids in tanks and systems. The valve has FDA approval enabling it to be used in plants where cryogenic gases come into contact with foodstuffs.

Type
Full Lift • Side Discharge • Twist Lift, Lever Lift  or Dome Top
Size & Connections
6mm (1/4″) to 40mm (1 1/2″) • BSPP (NPT on request)
Duty
Air • Cryogenic • Foodstuff • Inert Gases • Water
Materials
Stainless Steel Body • PTFE O-ring Sealing
Set Pressure Range
DN08-DN20 : 0.2 to 70 bar • DN25-DN32 : 0.2 to 50 bar
Temperature
-200°C to 200°C
Compliance & Approvals
FDA Approval • DIN EN ISO 4126-1 • TÜV test certificate: 2091
Contact Us2400– Goetze Stainless Steel Safety Relief Valve - Cryogenic & Food Duty - PDF DatasheetTUV Test ApprovalGoetze Valves

2400– Goetze Stainless Steel Safety Relief Valve - Cryogenic & Food Duty

492 – Goetze High Pressure Atmospheric Discharge Stainless Steel Safety Relief Valve

The 492 safety relief valve is suitable for the protection of pressure tanks and systems for air and inert gas applications at high pressure. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
High Pressure • Atmospheric Discharge (optional angled) • Twist Type Lift or Dome Top
Size & Connections
6mm (1/4″) to 25mm (1″) • BSPP
Duty
Air • Inert Gases • Oxygen (on request)
Materials
Stainless Steel Body • Metal Sealing / Polyamidimide
Set Pressure Range
DN10 : 50 to 630 bar • DN15 : 50 to 250 bar
Temperature
60°C to 180°C
Compliance & Approvals
DIN EN ISO 4126-1 • TÜV test certificate: 2076
Contact Us492 – Goetze High Pressure Atmospheric Discharge Stainless Steel Safety Relief Valve - PDF DatasheetTUV Test ApprovalGoetze Valves

492 – Goetze High Pressure Atmospheric Discharge Stainless Steel Safety Relief Valve

410 – Goetze Atmospheric Discharge Stainless Steel Safety Relief Valve

The 410 safety relief valve is suitable for the protection of pressure tanks and systems for air and inert gas applications. The valve has a high discharge capacity making it possible to use this small and inexpensive safety relief valve, even for large pressure tanks. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Atmospheric Discharge suitable for air compressor duties
Size & Connections
6mm (1/4″) to 25mm (1″) BSP
Duty
Air Compressors & Systems • Inert Gases
Materials
Stainless Steel Body • FKM Seat Seal (<25 bar) • PTFE Seat Seal (25> bar)
Set Pressure Range
0.2 to 50 bar
Temperature
FKM Seal : -20°C to 200°C • PTFE Seal : -60°C to 225°C
Compliance & Approvals
BS6759 Part 2 • TÜV • BSEN ISO 4126
Contact Us410 – Goetze Atmospheric Discharge Stainless Steel Safety Relief Valve - PDF DatasheetCertificated to BS6759 StandardsTUV Test ApprovalGoetze Valves

410 – Goetze Atmospheric Discharge Stainless Steel Safety Relief Valve

652D – Goetze Side Discharge Bronze Diaphragm Safety Relief Valve

The 652D is fitted with a diaphragm to prevent the media from entering the spring chamber thus making it suitable for the protection of pumps, closed cooling circuits and pressure tanks and systems for water and neutral liquids. Supplied set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
Side Discharge • Twist Lifting Mechanism
Size & Connections
15mm (1/2″) to 50mm (2″) BSP
Duty
Water • Neutral Liquids
Materials
Bronze Body • EPDM Disc (NBR option for oil duty)
Set Pressure Range
1 to 16 bar
Temperature
EPDM Disc : -50°C to 150°C • NBR Disc : -30°C to 130°C
Compliance & Approvals
BS6759 • TÜV Test Approval 293 • BSEN ISO 4126
Contact Us652D – Goetze Side Discharge Bronze Diaphragm Safety Relief Valve- PDF DatasheetCertificated to BS6759 StandardsTUV Test ApprovalGoetze Valves

652D – Goetze Side Discharge Bronze Diaphragm Safety Relief Valve

630 – Goetze In-Line Discharge Bronze Overflow & Pressure Control Valve

The 630 overflow and pressure control valve is designed for pump protection and bypass control applications. User pressure adjustment is achievable on site or this valve can be set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
In-Line Discharge • Overflow & Pressure Control • Gas Tight Dome
Size & Connections
15mm (1/2″) to 50mm (2″) • BSP Female or Male Unions
Duty
Air • Inert Gases • Oil  • Water
Materials
Bronze Body • EPDM Disc (FKM option)
Set Pressure Range
0.2 to 2 bar • 1.5 to 6 bar • 5.5 to 10 bar
Temperature
-10°C to 120°C (above 8 bar -20°C to 95°C)
Compliance & Approvals
Lloyds, DNV, BV, ABS & GL Type Approved
Contact Us630 – Goetze In-Line Discharge Bronze Overflow & Pressure Control Valve - PDF DatasheetGoetze Valves

630 – Goetze In-Line Discharge Bronze Overflow & Pressure Control Valve

430 – Goetze In-Line Discharge Stainless Steel Overflow & Pressure Control Valve

The 430 overflow and pressure control valve is designed for pump protection and bypass control applications. User pressure adjustment is achievable on site or this valve can be set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
In-Line Discharge • Overflow & Pressure Control • Gas Tight Dome
Size & Connections
15mm (1/2″) to 50mm (2″) • BSP Female or Male Unions
Duty
Air • Inert Gases • Oil  • Water
Materials
Stainless Steel Body • EPDM Disc (FKM option)
Set Pressure Range
0.2 to 2 bar • 1.5 to 6 bar • 5.5 to 10 bar
Temperature
-10°C to 120°C (above 8 bar -20°C to 95°C)
Compliance & Approvals
Lloyds, DNV, BV, ABS & GL Type Approved
Contact Us430 – Goetze In-Line Discharge Stainless Steel Overflow & Pressure Control Valve - PDF DatasheetGoetze Valves

430 – Goetze In-Line Discharge Stainless Steel Overflow & Pressure Control Valve

631 – Goetze In-Line Discharge Bronze Overflow & Pressure Control Valve – Flanged

The 631 overflow and pressure control valve is designed for pump protection and bypass control applications. User pressure adjustment is achievable on site or this valve can be set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
In-Line Discharge • Overflow & Pressure Control • Gas Tight Dome
Size & Connections
DN15 to DN100 • Flanged PN16/40
Duty
Air • Inert Gases • Oil  • Water
Materials
Bronze Body • EPDM Disc (FKM option)
Set Pressure Range
0.2 to 2 bar • 1.5 to 6 bar • 5.5 to 10 bar (65mm-100mm see datasheet)
Temperature
-20°C to 120°C (above 8 bar -20°C to 95°C)
Compliance & Approvals
Lloyds, DNV, BV, ABS & GL Type Approved
Contact Us631 – Goetze In-Line Discharge Bronze Overflow & Pressure Control Valve - Flanged - PDF DatasheetGoetze Valves

631 – Goetze In-Line Discharge Bronze Overflow & Pressure Control Valve - Flanged

431 – Goetze In-Line Discharge Stainless Steel Overflow & Pressure Control Valve – Flanged

The 431 overflow and pressure control valve is designed for pump protection and bypass control applications. User pressure adjustment is achievable on site or this valve can be set to your requirements with a certificate confirming lift pressure at no additional cost.

Type
In-Line Discharge • Overflow & Pressure Control • Gas Tight Dome
Size & Connections
DN15 to DN100 • Flanged PN16/40
Duty
Air • Inert Gases • Oil  • Water
Materials
Stainless Steel Body • EPDM Disc (FKM option)
Set Pressure Range
0.2 to 2 bar • 1.5 to 6 bar • 5.5 to 10 bar (65mm-100mm see datasheet)
Temperature
-20°C to 120°C (above 8 bar -20°C to 95°C)
Compliance & Approvals
Lloyds, DNV, BV, ABS & GL Type Approved
Contact Us431 – Goetze In-Line Discharge Stainless Steel Overflow & Pressure Control Valve - Flanged - PDF DatasheetGoetze Valves

431 – Goetze In-Line Discharge Stainless Steel Overflow & Pressure Control Valve - Flanged