General Purpose Solenoid Valves
Solenoid valves for general purpose duties including air, water and oils with NBR seals as standard. Other seal options are available including EPDM, FKM etc.
JV230010 – General Purpose Mini Solenoid Valve – 2/2 Normally Closed
The JV230010 is a small bore direct acting general purpose solenoid valve suitable for air, water and light oils up to 40 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM and HNBR on request. This two way valve is normally closed and energised to open.
Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
4mm (1/8″) to 10mm (3/8″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (EPDM, FKM & HNBR on request)
Pressure Range
Up to 20 Bar (dependent on size, coil & voltage)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 130°C • EPDM : 0 to 160°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
Asco 238 – General Purpose Solenoid Valve – 2/2 Normally Closed
The 238 general purpose solenoid valve is manufactured to a high standard by Asco and is designed to reduce water-hammer. It is pilot operated with a hung diaphragm which enables zero bar operating pressure and is supplied with NBR seals and gaskets as standard. This two way valve is normally closed and energised to open.
Type
2/2 • Normally Closed • Pilot Operated, Hung Diaphragm (No min. pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals & Gaskets (EPDM option)
Pressure & Temperature Range
0 to 10 Bar • NBR: -20 to 85°C
Voltage Options
AC : 24, 48V, 115V, 230V (50 Hz) • DC : 24V, 48V
Compliance & Approvals
WRAS Approved • Anti Water-Hammer Test (EN 60730-2-8 CENELEC) • IEC 335 • IP65
Part Numbers
SCG238A044 • SCG238A046 • SCG238A047 • SCG238A048 • SCG238A049
SCG238A050
JV230004 – General Purpose Solenoid Valve – 2/2 Normally Closed
The JV230004 is a direct acting general purpose solenoid valve suitable for air, water and light oils up to 40 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM and HNBR on request. This two way valve is normally closed and energised to open.
Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (EPDM, FKM & HNBR on request)
Pressure Range
Up to 16 Bar (dependent on size, coil & voltage)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 120°C • EPDM : 0 to 150°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V
JV230006 – General Purpose Solenoid Valve – 2/2 Normally Closed
The JV230006 is a servo assisted general purpose solenoid valve suitable for air, water and light oils up to 50 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM and HNBR on request. This two way valve is normally closed and energised to open.
Type
2/2 • Normally Closed • Servo Assisted (minimum pressure required)
Size & Connections
10mm (3/8″) to 80mm (3″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (EPDM, FKM & HNBR on request)
Pressure Range
0.5 to 15 Bar (0.3 Bar minimum for 65mm & 80mm)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 130°C • EPDM : 0 to 160°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
JV230007 – General Purpose Solenoid Valve – 2/2 Normally Closed
The JV230007 is a direct acting general purpose solenoid valve suitable for air, water and light oils up to 50 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM, Silicone, Hypalon, FFKM and HNBR on request. This two way valve is normally closed and energised to open.
Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 50mm (2″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (others on request)
Pressure Range
Up to 10 Bar (dependent on size, coil & voltage)
Temperature Range
NBR : 0 to 100°C • FKM : 0 to 120°C • EPDM : 0 to 120°C
Voltage Options
AC : 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V
JV230008 – General Purpose Solenoid Valve – 2/2 Normally Open
The JV230008 is a direct acting general purpose solenoid valve suitable for air, water and light oils up to 50 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM and HNBR on request. This two way valve is normally open and energised to close.
Type
2/2 • Normally Open • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (EPDM, FKM & HNBR on request)
Pressure Range
Up to 16 Bar (dependent on size, coil & voltage)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 120°C • EPDM : 0 to 150°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
JV230009 – General Purpose Solenoid Valve – 2/2 Normally Open
The JV230009 is a servo assisted general purpose solenoid valve suitable for air, water and light oils up to 50 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM, FFKM and HNBR on request. This two way valve is normally open and energised to close.
Type
2/2 • Normally Open • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 80mm (3″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (others on request)
Pressure Range
0.5 to 10 Bar (0.3 Bar minimum for 65mm & 80mm)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 120°C • EPDM : 0 to 120°C
Voltage Options
AC : 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
210 – Asco General Purpose Solenoid Valve – 2/2 Normally Closed/Open
The 210 general purpose solenoid valve is manufactured to a high standard by Asco, suitable for air, water and light oils up to 65 centistokes. It is pilot operated with a hung diaphragm which enables zero bar operating pressure and is supplied with NBR seals and gaskets as standard .
Type
2/2 • N/C or N/O • Pilot Operated, Hung Diaphragm (No min. pressure required)
Size & Connections
10mm (3/8″) to 40mm (1 1/2″) BSP Female
Duty
General Purpose
Materials
Brass or Stainless Steel Body • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 9 Bar (dependent on media, size & voltage) • -20 to 85°C
Voltage Options
AC : 24, 48V, 115V, 230V (50 Hz) • DC : 24V, 48V
Compliance & Approvals
IEC 335 • IP65
Part Numbers – Brass
SCE210C093 • SCE210C094 • SCE210D095 • SCE210B154 • SCE210B155
SCE210B156 • SCE210C033 • SCE210C034 • SCE210C035 • SCE210B057
SCE210B058 • SCE210B059
Part Numbers – Stainless Steel
SCG210C093 • SCG210C088 • SCG210D189 • SCG210B030 • SCG210B038
238 – Asco Stainless Steel Solenoid Valve – 2/2 Normally Closed/Open
The 238 stainless steel general purpose solenoid valve is manufactured to a high standard by Asco, suitable for air, water and light oils up to 37 centistokes. It is pilot operated with a floating diaphragm and requires a minimum differential pressure to operate.
Type
2/2 • N/C or N/O • Pilot Operated, Floating Diaphragm (Min. pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
General Purpose
Materials
Stainless Steel Body & Internal Parts • FPM Seals & Gaskets (EPDM option)
Pressure & Temperature Range
0.35 to 12 Bar (dependent on size & voltage) • -20 to 85°C
Voltage Options
AC : 24, 48V, 115V, 230V (50 Hz) • DC : 24V, 48V
Compliance & Approvals
IEC 335 • IP65
Part Numbers – N/C
SCG238C101V • SCG238C102V • SCG238C103V • SCG238C104V
Part Numbers – N/O
SCG238C105V • SCG238C106V • SCG238C107V • SCG238C108V