Markets

Products A to Z

Solenoid Valves

Johnson Valves stock a large range of direct, servo and pilot operated solenoid valves with 2/2, 3/2 and 5/2 operations suitable for Air, Gas, Water, Steam, Oil, Petrol Dispensing and Cryogenic applications. A full range of sizes, voltages, pressure ranges and coil housings, including ATEX certified are available.


Solenoid Valve Types

Direct Acting

Zero Pressure

Pressure Assisted

Pressure Assisted

Normally Closed

Normally Closed

Normally Open

Normally Open

Spool

Spool


Solenoid Valves Duties & Applications

Cryogenic

Cryogenic

Gas

Gas

General Purpose

General Purpose

Steam

Steam

WRAS Approved

WRAS Approved

JV230010 – General Purpose Mini Solenoid Valve – 2/2 Normally Closed

The JV230010 is a small bore direct acting general purpose solenoid valve suitable for air, water and light oils up to 40 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM and HNBR on request. This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
4mm (1/8″) to 10mm (3/8″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (EPDM, FKM & HNBR on request)
Pressure Range
Up to 20 Bar (dependent on size, coil & voltage)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 130°C • EPDM : 0 to 160°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
Contact UsJV230010 - General Purpose Mini Solenoid Valve - 2/2 Normally Closed - PDF Datasheet

JV230010 - General Purpose Mini Solenoid Valve - 2/2 Normally Closed

JV230003 – WRAS Approved Solenoid Valve – 2/2 Normally Closed

The JV230003 is a direct acting WRAS approved solenoid valve suitable for potable water applications. This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
Potable (Drinking) Water
Materials
Brass Body • Stainless Steel Internals • EPDM Seals
Pressure Range
Up to 10 Bar (dependent on size, coil & voltage)
Temperature Range
0 to 90°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
Contact UsJV230003 - WRAS Approved Solenoid Valve - 2/2 Normally Closed - PDF DatasheetWRAS Approved Product

JV230003 - WRAS Approved Solenoid Valve - 2/2 Normally Closed

238 – Asco WRAS Approved Solenoid Valve – 2/2 Normally Closed

The 238 WRAS approved potable water solenoid valve is manufactured to a high standard by Asco. It is pilot operated with a hung diaphragm which enables zero bar operating pressure and is supplied with EPDM seals and gaskets.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Pilot Operated, Hung Diaphragm  (No min. pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
Potable (Drinking) Water
Materials
Brass Body • Stainless Steel Internals • EPDM Seals & Gaskets
Pressure & Temperature Range
0 to 10 Bar • -20 to 180°C
Voltage Options
AC : 24, 48V, 115V, 230V (50 Hz) • DC : 24V, 48V
Compliance & Approvals
WRAS Approved • Anti Water-Hammer Test (EN 60730-2-8 CENELEC) • IEC 335 • IP65
Part Numbers
SCG238A044BW • SCG238A046BW • SCG238A047BW • SCG238A048BW
 
SCG238A049BW • SCG238A050BW
Contact UsAsco 238 - WRAS Approved Solenoid Valve - 2/2 Normally Closed - PDF DatasheetWRAS Approved ProductManufactured by Asco

Asco 238 - WRAS Approved Solenoid Valve - 2/2 Normally Closed

H262 – Asco WC Flush Latching Solenoid Valve – 2/2 Normally Closed

The 26260 WRAS approved WC solenoid valve is manufactured to a high standard by Asco. This valve has a magnetic latch operation and is usually used in toilet flushing systems.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting  (No min. pressure required)
Size & Connections
15mm Compression
Duty
Water
Materials
Brass Body • Stainless Steel Internals • EPDM Seals & Gaskets
Pressure & Temperature Range
0 to 12 Bar (dependent on orifice size) • 0 to 50°C
Voltage Options
DC : 3V • 6V • 9V • 12V • 24V
Compliance & Approvals
WRAS Approved • IEC 335 • IP65
Part Numbers
H262601BW • H262602BW • H262603BW • H262604BW • H262605BW
Contact UsAsco H262 - WC Flush Latching Solenoid Valve - 2/2 Normally Closed - PDF DatasheetWRAS Approved ProductManufactured by Asco

Asco H262 - WC Flush Latching Solenoid Valve - 2/2 Normally Closed

Asco 238 – General Purpose Solenoid Valve – 2/2 Normally Closed

The 238 general purpose solenoid valve is manufactured to a high standard by Asco and is designed to reduce water-hammer. It is pilot operated with a hung diaphragm which enables zero bar operating pressure and is supplied with NBR seals and gaskets as standard.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Pilot Operated, Hung Diaphragm  (No min. pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals & Gaskets (EPDM option)
Pressure & Temperature Range
0 to 10 Bar • NBR: -20 to 85°C
Voltage Options
AC : 24, 48V, 115V, 230V (50 Hz) • DC : 24V, 48V
Compliance & Approvals
WRAS Approved • Anti Water-Hammer Test (EN 60730-2-8 CENELEC) • IEC 335 • IP65
Part Numbers
SCG238A044 • SCG238A046 • SCG238A047 • SCG238A048 • SCG238A049
 
SCG238A050
Contact UsAsco 238 - General Purpose Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 238 - General Purpose Solenoid Valve - 2/2 Normally Closed

JV230006 – General Purpose Solenoid Valve – 2/2 Normally Closed

The JV230006 is a servo assisted general purpose solenoid valve suitable for air, water and light oils up to 50 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM and HNBR on request. This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Servo Assisted (minimum pressure required)
Size & Connections
10mm (3/8″) to 80mm (3″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (EPDM, FKM & HNBR on request)
Pressure Range
0.5 to 15 Bar (0.3 Bar minimum for 65mm & 80mm)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 130°C • EPDM : 0 to 160°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
Contact UsJV230006 - General Purpose Solenoid Valve - 2/2 Normally Closed - PDF Datasheet

JV230006 - General Purpose Solenoid Valve - 2/2 Normally Closed

JV230007 – General Purpose Solenoid Valve – 2/2 Normally Closed

The JV230007 is a direct acting general purpose solenoid valve suitable for air, water and light oils up to 50 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM, Silicone, Hypalon, FFKM and HNBR on request. This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 50mm (2″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (others on request)
Pressure Range
Up to 10 Bar (dependent on size, coil & voltage)
Temperature Range
NBR : 0 to 100°C • FKM : 0 to 120°C • EPDM : 0 to 120°C
Voltage Options
AC : 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V
Contact UsJV230007 - General Purpose Solenoid Valve - 2/2 Normally Closed - PDF Datasheet

JV230007 - General Purpose Solenoid Valve - 2/2 Normally Closed

JV230004 – General Purpose Solenoid Valve – 2/2 Normally Closed

The JV230004 is a direct acting general purpose solenoid valve suitable for air, water and light oils up to 40 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM and HNBR on request. This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (EPDM, FKM & HNBR on request)
Pressure Range
Up to 16 Bar (dependent on size, coil & voltage)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 120°C • EPDM : 0 to 150°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V
Contact UsJV230004 - General Purpose Solenoid Valve - 2/2 Normally Closed - PDF Datasheet

JV230004 - General Purpose Solenoid Valve - 2/2 Normally Closed

JV230008 – General Purpose Solenoid Valve – 2/2 Normally Open

The JV230008 is a direct acting general purpose solenoid valve suitable for air, water and light oils up to 50 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM and HNBR on request. This two way valve is normally open and energised to close.

Type
2/2 • Normally Open • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (EPDM, FKM & HNBR on request)
Pressure Range
Up to 16 Bar (dependent on size, coil & voltage)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 120°C • EPDM : 0 to 150°C
Voltage Options
AC : 12, 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
Contact UsJV230008 - General Purpose Solenoid Valve - 2/2 Normally Open - PDF Datasheet

JV230008 - General Purpose Solenoid Valve - 2/2 Normally Open

JV230009 – General Purpose Solenoid Valve – 2/2 Normally Open

The JV230009 is a servo assisted general purpose solenoid valve suitable for air, water and light oils up to 50 centistokes. The valve is supplied with NBR seals and gaskets as standard with the option of EPDM, FKM, FFKM and HNBR on request. This two way valve is normally open and energised to close.

Type
2/2 • Normally Open • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 80mm (3″) BSP Female
Duty
General Purpose
Materials
Brass Body • Stainless Steel Internals • NBR Seals (others on request)
Pressure Range
0.5 to 10 Bar (0.3 Bar minimum for 65mm & 80mm)
Temperature Range
NBR : 0 to 80°C • FKM : 0 to 120°C • EPDM : 0 to 120°C
Voltage Options
AC : 24, 110V, 230V, 380V (50/60 Hz) • DC : 12V, 24V, 48V, 110V, 220V
Contact UsJV230009 - General Purpose Solenoid Valve - 2/2 Normally Open - PDF Datasheet

JV230009 - General Purpose Solenoid Valve - 2/2 Normally Open

210 – Asco General Purpose Solenoid Valve – 2/2 Normally Closed/Open

The 210 general purpose solenoid valve is manufactured to a high standard by Asco, suitable for air, water and light oils up to 65 centistokes. It is pilot operated with a hung diaphragm which enables zero bar operating pressure and is supplied with NBR seals and gaskets as standard . 

Type
2/2 • N/C or N/O • Pilot Operated, Hung Diaphragm  (No min. pressure required)
Size & Connections
10mm (3/8″) to 40mm (1 1/2″) BSP Female
Duty
General Purpose
Materials
Brass or Stainless Steel Body • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 9 Bar (dependent on media, size & voltage) • -20 to 85°C
Voltage Options
AC : 24, 48V, 115V, 230V (50 Hz) • DC : 24V, 48V
Compliance & Approvals
IEC 335 • IP65
Part Numbers – Brass
SCE210C093 • SCE210C094 • SCE210D095 • SCE210B154 • SCE210B155
 
SCE210B156 • SCE210C033 • SCE210C034 • SCE210C035 • SCE210B057
 
SCE210B058 • SCE210B059
Part Numbers – Stainless Steel
SCG210C093 • SCG210C088 • SCG210D189 • SCG210B030 • SCG210B038
Contact UsAsco 210 - General Purpose Solenoid Valve - 2/2 Normally Closed/Open - PDF DatasheetManufactured by Asco

Asco 210 - General Purpose Solenoid Valve - 2/2 Normally Closed/Open

222 – Asco Steam & Hot Water Solenoid Valve – 2/2 Normally Closed

The 222 is a brass solenoid valve is manufactured to a high standard by Asco which is suitable for steam and hot water applications. It is direct operated and therefore requires no minimum operating pressure.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Operated (No min. pressure required)
Size & Connections
10mm (3/8″) to 20mm (3/4″) BSP Female
Duty
Steam • Hot Water
Materials
Brass Body, Piston & Seat •  PTFE Seals & Gaskets
Pressure & Temperature Range
0 to 9 Bar • -20 to 184°C
Voltage
AC : 24V • 115V • 230V (50 Hz)
Compliance & Approvals
IEC 335 • IP65
Part Numbers
SCE222D001 • SCE222D002 • SCE222E003
Contact UsAsco 222 - Steam & Hot Water Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 222 - Steam & Hot Water Solenoid Valve - 2/2 Normally Closed

222LT – Asco Cryogenic Solenoid Valve – 2/2 Normally Closed

The 222LT is a brass solenoid valve is manufactured to a high standard by Asco which is suitable for cryogenic applications. It is pilot operated with a hung diaphragm and therefore requires no minimum operating pressure. This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Pilot Operated, Hung Diaphragm (No min. pressure required)
Size & Connections
15mm (1/2″) to 20mm (3/4″) BSP Female
Duty
Cryogenic
Materials
Brass Body, Piston & Seat •  PTFE Seals & Gaskets
Pressure & Temperature Range
0 to 9 Bar • -196 to 90°C
Voltage
AC : 24V •48V •115V • 230V (50 Hz)
Compliance & Approvals
IEC 335 • IP65
Part Numbers
SCE222E002LT • SCE222F003LT
Contact UsAsco 222LT - Cryogenic Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 222LT - Cryogenic Solenoid Valve - 2/2 Normally Closed

JV230005 – Steam & High Temperature Solenoid Valve – 2/2 Normally Closed

The JV230005 is a servo assisted solenoid valve suitable for steam & high temperature water, light oil and air. The valve is supplied with PTFE seals and gaskets.. This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Servo Assisted (minimum pressure required)
Size & Connections
10mm (3/8″) to 50mm (2″) BSP Female
Duty
Steam & High Temperature Media
Materials
Brass Body • Stainless Steel Internals • PTFE Seals
Pressure Range
0.5 to 20 Bar (12 bar for steam)
Temperature Range
0 to 200°C
Voltage Options
AC : 24, 110V, 230V (50/60 Hz) • DC : 12V, 24V
Contact UsJV230005 - Steam & High Temperature Solenoid Valve - 2/2 Normally Closed - PDF Datasheet

JV230005 - Steam & High Temperature Solenoid Valve - 2/2 Normally Closed

JV230001 – Gas Solenoid Valve – 2/2 Normally Closed – Threaded

The JV230001 is a Class “A” gas solenoid valve suitable for gas in gas power burners, atmospheric gas boilers, industrial ovens and other gas consuming appliances. Supplied with an incorporated mesh filter and has test point connections on the inlet and outlet for CPI switch, pressure gauges etc. The valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 80mm (3″) BSP Female
Duty
Gas Service
Materials
Aluminium Body • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 360 mbar • Ambient: -15 to 60°C
Voltage Options
AC : 24, 110V, 230V (50/60 Hz) • DC : 12V, 24V
Compliance & Approvals
Class “A” BS EN161 • British Gas & EU Standards 90/396/EEC, 73/23/EEC, 89/336/EEC
Contact UsJV230001 - Gas Solenoid Valve - Normally Closed - Direct Acting - PDF Datasheet

JV230001 - Gas Solenoid Valve - Normally Closed - Direct Acting

JV230002 – Gas Solenoid Valve – 2/2 Normally Closed – Flanged PN16

The JV230002 is a Class “A” gas solenoid valve suitable for gas in gas power burners, atmospheric gas boilers, industrial ovens and other gas consuming appliances. Supplied with an incorporated mesh filter and has test point connections on the inlet and outlet for CPI switch, pressure gauges etc. The valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
DN65 to DN200 • Flanged PN16
Duty
Gas Service
Materials
Aluminium Body (DN125-200 Steel) • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 360 mbar • Ambient: -15 to 60°C
Voltage Options
AC : 24, 110V, 230V (50/60 Hz) • DC : 12V, 24V
Compliance & Approvals
Class “A” BS EN161 • British Gas & EU Standards 90/396/EEC, 73/23/EEC, 89/336/EEC
Contact UsJV230002 - Gas Solenoid Valve - 2/2 Normally Closed - Flanged PN16 - PDF Datasheet

JV230002 - Gas Solenoid Valve - 2/2 Normally Closed - Flanged PN16

262 – Asco Gas Solenoid Valve – 2/2 Normally Closed

The 262 British Gas & European Gas brass solenoid valve is manufactured to a high standard by Asco. It is direct operated and therefore requires no minimum operating pressure.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Operated (No min. pressure required)
Size & Connections
4mm (1/8″) to 6mm (1/4″) BSP Female
Duty
Gas Service
Materials
Brass Body & Seat • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 2.76 Bar (dependent on size) • 0 to 60°C
Voltage
AC : 24V • 48v • 115V • 230V (50 Hz)
Compliance & Approvals
British Gas • EN 161 • IEC 335 • IP65
Part Numbers
EGSCE262C002 • EGSCE262C090
Contact UsAsco 262 - Gas Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 262 - Gas Solenoid Valve - 2/2 Normally Closed

030 – Asco Gas Solenoid Valve – 2/2 Normally Closed

The 030 British Gas & European Gas brass solenoid valve is manufactured to a high standard by Asco. It is direct operated and therefore requires no minimum operating pressure.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Operated (No min. pressure required)
Size & Connections
10mm (3/8″) to 15mm (1/2″) BSP Female
Duty
Gas Service
Materials
Brass Body & Seat • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 480 millibar (dependent on size) • 0 to 60°C
Voltage
AC : 230V (50 Hz)
Compliance & Approvals
British Gas • EN 161 • IEC 335 • IP65
Part Numbers
EGSCE030B010 • EGSCE030A016
Contact UsAsco 030 - Gas Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 030 - Gas Solenoid Valve - 2/2 Normally Closed

040 – Asco Gas Solenoid Valve – 2/2 Normally Closed

The 040 British Gas & European Gas aluminium solenoid valve is manufactured to a high standard by Asco. It is direct operated and therefore requires no minimum operating pressure.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Operated (No min. pressure required)
Size & Connections
10mm (3/8″) to 40mm (1 1/2″) BSP Female
Duty
Gas Service
Materials
Aluminium Body & Seat • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 140 millibar (dependent on size) • 0 to 60°C
Voltage
AC : 24V • 48v • 115V • 230V (50 Hz)
Compliance & Approvals
British Gas • EN 161 • IEC 335 / CEE-10 • IP65 / IP41
Part Numbers
EGSCE040B001 • EGSCE040B002 • EGSCE040B003 • EGSCE040B024
 
EGSCE040B25 • EGSCE040B26
Contact UsAsco 040 - Gas Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 040 - Gas Solenoid Valve - 2/2 Normally Closed

238 – Asco Stainless Steel Solenoid Valve – 2/2 Normally Closed/Open

The 238 stainless steel general purpose solenoid valve is manufactured to a high standard by Asco, suitable for air, water and light oils up to 37 centistokes. It is pilot operated with a floating diaphragm and requires a minimum differential pressure to operate.

Type
2/2 • N/C or N/O • Pilot Operated, Floating Diaphragm  (Min. pressure required)
Size & Connections
10mm (3/8″) to 25mm (1″) BSP Female
Duty
General Purpose
Materials
Stainless Steel Body & Internal Parts • FPM Seals & Gaskets (EPDM option)
Pressure & Temperature Range
0.35 to 12 Bar (dependent on size & voltage) • -20 to 85°C
Voltage Options
AC : 24, 48V, 115V, 230V (50 Hz) • DC : 24V, 48V
Compliance & Approvals
IEC 335 • IP65
Part Numbers – N/C
SCG238C101V • SCG238C102V • SCG238C103V • SCG238C104V
Part Numbers – N/O
SCG238C105V • SCG238C106V • SCG238C107V • SCG238C108V
Contact Us238 - Asco Stainless Steel Solenoid Valve - 2/2 Normally Closed/Open - PDF DatasheetManufactured by Asco

238 - Asco Stainless Steel Solenoid Valve - 2/2 Normally Closed/Open

263LT – Asco Cryogenic Solenoid Valve – 2/2 Normally Closed

The 263LT is a brass solenoid valve is manufactured to a high standard by Asco which is suitable for cryogenic applications. It is direct operated and therefore requires no minimum operating pressure.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Operated (No min. pressure required)
Size & Connections
4mm (1/8″) NPT Female • 6mm (1/4″) BSP Female • 10mm (3/8″) BSP Female
Duty
Cryogenic
Materials
Brass Body, Piston & Seat •  PTFE Disc
Pressure & Temperature Range
0 to 9 Bar  (dependent on size & orifice) • -196 to 90°C
Voltage
AC : 24V •48V •115V • 230V (50 Hz)
Compliance & Approvals
IEC 335 • IP65
Part Numbers
SCB263A240LT • SCE263205LT • SCE263209LT • SCE263B206LT • SCE263A210LT
Contact Us263LT - Asco Cryogenic Solenoid Valve – 2/2 Normally Closed - PDF DatasheetManufactured by Asco

263LT - Asco Cryogenic Solenoid Valve – 2/2 Normally Closed

JV231001 – NAMUR Solenoid Operated Spool Valve

The JV231001 interchangeable spool valve can be adapted to a 3/2 or a 5/2 function for controlling double-acting and single-acting actuators.

Type
Solenoid Operated • 3/2 & 5/2 Interchangeable Function
Mountings
NAMUR Interface & 1/4″ BSP Ports
Air Pressure Range
1.5 to 8 Bar
Voltage
12VDC • 24VDC • 24VAC • 110VAC • 230VAC
Life Cycle
12,000,000 Operations
Body Material
Aluminium Alloy
Contact UsJV231001 - NAMUR Solenoid Operated Spool Valve - PDF Datasheet

JV231001 - NAMUR Solenoid Operated Spool Valve