Flanged Gate Valve
Gate valves with flanged connections to various standards including DIN, EN and ANSI.
JV060002 – Bronze Gate Valve
Full bore gate valve ideally suited for cost-effective isolation of a variety of fluids. PN16 flanged connections (can be supplied with other flange drillings or undrilled on request).
Type
Wedge • Screwed Bonnet • Non-Rising Stem
Size & Connections
DN15 to DN100 • PN16 Flange
Duty
Air • Inert Gas • Oil • Water
Materials
Bronze Body, Bonnet & Wedge • Brass Stem • PTFE Packing
Pressure Rating
PN16
Temperature
-10 to 150°C
Compliance & Approvals
BS5154
35 – Bronze Hattersley Gate Valve
Robustly manufactured, full-bore gate valve ideally suited for various fluids including steam, water and inert gases.
Type
Wedge • Screwed Bonnet • Inside Screw & Non-Rising Stem
Size & Connections
DN20 to DN100 • PN16 Flange
Duty
Air • Inert Gas • Oil • Steam • Water
Materials
Bronze Body, Bonnet & Wedge • Brass Stem • Graphite Packing
Pressure Rating
PN16
Temperature
7 Bar: 170°C • 16 Bar: -10 to 100°C
Compliance & Approvals
BS5154 Series B • Length to BS EN 558-1
JV060006 – Cast Iron Gate Valve to DIN 3202-F4
Economic, full-bore gate valve with a brass seat and stainless steel stem ideally suited for water applications.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN40 to DN300 • PN16 Flange
Duty
Water
Materials
Cast Iron Body, Bonnet & Wedge • Brass Trim • Stainless Steel Stem • Graphite Packing
Pressure Rating
PN16
Temperature
10 to 100°C
Compliance & Approvals
DIN3202-F4
JV060007 – Cast Iron Gate Valve to BS5150 (EN1171-2002, MSS SP-70)
Full bore gate valve with bronze trim conforming to BS5150. Higher pressure and temperature ratings give this valve more flexibility on the applications that it can be used on particularly water and oil.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Air • Inert Gases • Oil • Steam • Water
Materials
Ductile Iron Body & Wedge • Bronze Trim • SS/Brass Stem • Graphite Packing
Pressure Rating
PN16
Temperature
12.8 Bar: 200°C • 16 Bar: 120°C
Compliance & Approvals
BS5150 (EN1171-2002, MSS SP-70) • Length to EN558-1 Series 3
JV060008 – Cast Iron Gate Valve to BS3464, Drilled to BS10 Table E
Full bore gate valve with a bronze trim conforming to BS3464, flanged and drilled to BS10 Table E.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN300 • BS10 Table E Flange (DN100 also available BS10 Table D)
Duty
Air • Inert Gases • Oil • Water
Materials
Cast Iron Body & Wedge • Bronze Trim • Stainless Steel Stem • Graphite Packing
Pressure Rating
PN16
Temperature
-10 to 120°C
Compliance & Approvals
BS3464
JV061017 – Ductile Iron PN16 Rated Gate Valve Length to EN558 Table 2 Series 3
PN16 rated gate valve suitable for waterworks applications, potable water duties and buried service for pressures up to 16 bar. Manually operated, supplied with either a stem cap or a handwheel, please specify when ordering.
Type
Wedge • Metal Seated • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Water
Materials
Ductile Iron Body & Wedge • Stainless Steel Stem • EPDM Seals
Pressure Rating
PN16
Temperature
-10 to 70°C
Compliance & Approvals
WRAS Listed Non-Metallic Materials • BS 5163 Part 1 & 2: 2004
JV060015 – Cast Iron Marine Gate Valve
Marine quality, bolted bonnet gate valve to DIN 3352 T2 with an open & shut indicator.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN40 to DN300 • 25-150mm: PN16, 175-300mm: PN10 Flange (others on request)
Duty
Air • Inert Gas • Oil • Seawater • Water
Materials
Cast Iron Body • Special Brass or Stainless Steel Stem • Bronze Disc
Pressure Rating
40-150mm: PN10 Rated • 175-300mm: PN6 Rated
Temperature
-10 to 120°C
Compliance & Approvals
DIN 3352 T2
JV060014 – Ductile Iron Marine Gate Valve
Marine quality gate valve with an open & shut indicator. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN40 to DN300 • 25-150mm – PN16 • 175-300mm – PN10 Flange (others on request)
Duty
Air • Inert Gas • Oil • Seawater • Water
Materials
Ductile Iron Body • Bronze or Stainless Steel Trim
Pressure Rating
40-150mm: PN16 Rated • 175-300mm: PN10 Rated
Temperature
-10 to 120°C
Compliance & Approvals
DIN 3352 T2
JV060009 – Ductile Iron Resilient Seated Gate Valve
Lightweight, resilient seated full bore gate valve suitable for waterworks applications, potable water duties and buried service. Manually operated, supplied with either a stem cap or a handwheel, please specify when ordering.
Type
Aquavault • Resilient Seated • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Water
Materials
Ductile Iron Body • Stainless Steel Stem • EPDM Seals
Pressure Rating
PN16
Temperature
-10 to 70°C
Compliance & Approvals
WRAS • EN1074-1 & 2 : 2000 • BS 5163 Pt 1 & 2 : 2004
JV060010 – Ductile Iron Gate Valve with ISO 5210 Mounting Pad
Lightweight, resilient seated full bore gate valve suitable for waterworks applications, potable water duties and buried service. Supplied bare shaft with an ISO 5210 mounting plate for interfacing with a variety of actuators and gearbox options.
Type
Aquavault • Resilient Seated • Inside Screw & Non-Rising Stem • ISO 5210 Top
Size & Connections
DN80 to DN300 • PN16 Flange
Duty
Water
Materials
Ductile Iron Body • Stainless Steel Stem • EPDM Seals
Pressure Rating
PN16
Temperature
-10 to 70°C
Compliance & Approvals
WRAS Listed Materials • EN1074-1 & 2 : 2000 • BS 5163 Pt 1 & 2 : 2004
JV060011 – Ductile Iron Gate Valve with ISO 5210 Mounting Pad
Low maintenance metal seated full bore gate valve with a ductile iron body suitable for water, wastewater and sewage duties. Supplied bare shaft with an ISO 5210 mounting plate for interfacing with a variety of actuators and gearbox options.
Type
Wedge • Metal Seated • Inside Screw & Non-Rising Stem • ISO 5210 Top
Size & Connections
DN350 to DN1200 • PN16 Flange
Duty
Water
Materials
Ductile Iron Body & Wedge • Stainless Steel Stem • EPDM Seals
Pressure Rating
PN16
Temperature
-10 to 70°C
Compliance & Approvals
WRAS Listed Non-Metallic Materials • BS5163 • EN1074 & EN1171
JV060012 – Ductile Iron PN25 Rated Gate Valve
PN25 rated gate valve suitable for waterworks applications, potable water duties and buried service for pressures up to 25 bar. Manually operated, supplied with either a stem cap or a handwheel, please specify when ordering. Resilient seated option on request
Type
Wedge • Metal Seated • Inside Screw & Non-Rising Stem
Size & Connections
DN80 to DN300 • PN25 Flange
Duty
Water
Materials
Ductile Iron Body & Wedge • Stainless Steel Stem • EPDM Seals
Pressure Rating
PN25
Temperature
-10 to 70°C
Compliance & Approvals
WRAS Listed Non-Metallic Materials • BS 5163 Part 1 & 2: 2004
JV060013 – Ductile Iron PN25 Rated Gate Valve with ISO 5210 Mounting Pad
PN25 rated gate valve with ISO 5210 top suitable for waterworks applications, potable water duties and buried service for pressures up to 25 bar. Manually operated, supplied with either a stem cap or a handwheel, please specify when ordering.
Type
Wedge • Metal Seated • Inside Screw & Non-Rising Stem • ISO 5210 Top
Size & Connections
DN80 to DN300 • PN25 Flange
Duty
Water
Materials
Ductile Iron Body & Wedge • Stainless Steel Stem • EPDM Seals
Pressure Rating
PN25
Temperature
-10 to 70°C
Compliance & Approvals
WRAS Listed Non-Metallic Materials • BS 5163 Part 1 & 2: 2004
IW2 – Bronze Marine Gate Valve
Marine quality gate valve with an open & shut indicator. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN15 to DN350 • 15-150mm: PN16 • 200-350mm: PN10 Flange (others on request)
Duty
Air • Inert Gas • Oil • Seawater • Steam • Water
Materials
Bronze Body & Bonnet • Manganese Bronze Stem • Bronze Disc
Pressure Rating
15-200mm: PN16 Rated • 250-350mm: PN10 Rated
Temperature
Up to 180°C (dependent on pressure & size)
Compliance & Approvals
BS 5154 & BSMA 65 Part 9 • 3.1 & 3.2 Material Certification (available on request)
IW3 – Bronze Marine Gate Valve
Marine quality gate valve with an open & shut indicator. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN40 to DN150 • PN16 Flange (others on request)
Duty
Air • Inert Gas • Oil • Seawater • Steam • Water
Materials
Bronze Body & Bonnet • Manganese Bronze Stem • Bronze Disc
Pressure Rating
PN16 Rated
Temperature
13 Bar: 180°C • 16 Bar: 120°C
Compliance & Approvals
3.1 & 3.2 Material Certification (available on request)
IW4 – Bronze Marine Gate Valve
Marine quality gate valve with an open & shut indicator. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN25 to DN300 • 15-175mm: PN16 • 200-300mm: PN10 Flange (others on request)
Duty
Air • Inert Gas • Oil • Seawater • Steam • Water
Materials
Bronze Body & Bonnet • Phosphor Bronze Stem • Bronze Disc
Pressure Rating
Temperature
Up to 180°C (dependent on pressure & size)
Compliance & Approvals
DIN 3352 T2 • 3.1 & 3.2 Material Certification (available on request)
IW5 – Bronze Marine Gate Valve
Marine quality gate valve with an open & shut indicator. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN40 to DN600 • 15-150mm: PN16 • 200-600mm: PN10 Flange (others on request)
Duty
Air • Inert Gas • Oil • Seawater • Steam • Water
Materials
Bronze Body & Bonnet • Phosphor Bronze Stem • Bronze Disc
Pressure Rating
Temperature
Up to 180°C (dependent on pressure & size)
Compliance & Approvals
3.1 & 3.2 Material Certification (available on request)
JV060025 – Bronze Marine ANSI 150 Gate Valve
Marine quality gate valve with an open & shut indicator. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN25 to DN150 • Flanged ANSI 150 (others on request)
Duty
Air • Inert Gas • Oil • Seawater • Steam • Water
Materials
Bronze Body & Bonnet • Phosphor Bronze Stem • Bronze Disc
Pressure Rating
PN16 (ANSI on request)
Temperature
Up to 180°C (dependent on pressure)
Compliance & Approvals
3.1 & 3.2 Material Certification (available on request)
JV060019 – Carbon Steel ANSI 150 Gate Valve
ANSI 150 gate valve suitable for industrial, process, offshore and petrochemical use. Manually operated, supplied with a handwheel (gearbox, electric & pneumatic actuation on request)
Type
Flexible Wedge • Rising Stem
Size & Connections
DN50 to DN600 • ASA 150 Flange (others on request)
Duty
Air • Inert Gas • Oil • Steam • Water
Materials
Steel Body • Stainless Steel Stem & Seat Rings • Steel + Stellite Face Wedge
Pressure Rating
Up to 19.6 Bar (dependent on temperature)
Temperature
Up to 425°C (dependent on pressure)
Compliance & Approvals
ANSI 150 • API 600 • BS1414 • ASME B16.34
JV060020 – Carbon Steel ANSI 300 Gate Valve
ANSI 300 gate valve suitable for industrial, process, offshore and petrochemical use. Manually operated, supplied with a handwheel (gearbox, electric & pneumatic actuation on request).
Type
Flexible Wedge • Rising Stem
Size & Connections
DN50 to DN600 • ASA 300 Flange (others on request)
Duty
Air • Inert Gas • Oil • Steam • Water
Materials
Steel Body • Stainless Steel Stem & Seat Rings • Steel + Stellite Face Wedge
Pressure Rating
Up to 51 Bar (dependent on temperature)
Temperature
Up to 425°C (dependent on pressure)
Compliance & Approvals
ANSI 300 • API 600 • BS1414 • ASME B16.34
JV060021 – Carbon Steel ANSI 600 Gate Valve
ANSI 600 gate valve suitable for industrial, process, offshore and petrochemical use. Manually operated, supplied with a handwheel (gearbox, electric & pneumatic actuation on request).
Type
Flexible Wedge • Rising Stem
Size & Connections
DN50 to DN400 • ASA 600 Flange (others on request)
Duty
Air • Inert Gas • Oil • Steam • Water
Materials
Steel Body • Stainless Steel Stem & Seat Rings • Steel + Stellite Face Wedge
Pressure Rating
Up to 102 Bar (dependent on temperature)
Temperature
Up to 425°C (dependent on pressure)
Compliance & Approvals
ANSI 600 • API 600 • BS1414 • ASME B16.34
JV060022 – Cast Steel Parallel Slide Gate Valve
Parallel slide valve with spring loaded discs which automatically create a wiping action thus cleaning the seating surface during normal operation.
Type
Parallel Slide • Outside Screw & Rising Stem
Size & Connections
DN50 to DN300 • PN16 or PN40 Flange (others on request)
Duty
Air • Inert Gas • Oil • Steam • Water
Materials
Steel Body & Bonnet • Stainless Steel Stem • Copper-Nickel Silicon Alloy Seat Doors
Pressure Rating
PN16 or PN40 Rated
Temperature
Up to 400°C (dependent on pressure & size)
Compliance & Approvals
BSEN 1984-2010
JV060026 – Ductile Iron Gas Approved Gate Valve
This gas approved ductile iron gate valve has an NBR encapsulated wedge, conforming to GIS / BSI V7-1:2007 and EN13774. This valve is supplied with a stem cap top and handwheel.
Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Gas
Materials
Ductile Iron Body • NBR Encapsulated Wedge • Stainless Steel Stem • NBR Seals
Pressure Rating
PN7
Temperature
-20 to 60°C
Compliance & Approvals
GIS / BSI V7-1:2007 • EN13774 • Face to face to EN558-1, 1986 Table 3
JV060027 – Ductile Iron Gas Approved Double Block & Bleed Gate Valve
This gas approved ductile iron double block and bleed gate valve has an NBR encapsulated wedge, conforming to GIS / BSI V7-1:2007 and EN13774. This valve is supplied with a stem cap top and handwheel.
Type
Double Block & Bleed
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Gas
Materials
Ductile Iron Body • NBR Encapsulated Wedge • Stainless Steel Stem • NBR Seals
Pressure Rating
PN7
Temperature
-20 to 60°C
Compliance & Approvals
GIS / BSI V7-1:2007 • EN13774 • Face to face to EN558-1, 1986 Table 3
R-2361 – Ductile Iron Mueller® Gate Valve
Mueller® resilient seated outside screw and yoke wedge gate valves have features to make them easier to operate and to preserve the sealing capability and interior coating integrity for many years of reliable service. Manually operated, supplied with a handwheel.
Type
Wedge • Resilient Seated • Outside Screw & Yoke
Size & Connections
DN50 to DN600 • ANSI 125 Flange (PN10/16 on request)
Duty
Water
Materials
Iron Body, Bonnet & Yoke • Stainless Steel Stem • Rubber Encapsulated Iron Disc
Pressure Rating
Up to 24 Bar (dependent on size)
Temperature
0 to 50°C
Compliance & Approvals
UL listed • FM approved • AWWA/ANSI C550 • ANSI/NSF 61 & 372
A-2462 – Ductile Iron Mueller® Gate Valve
Mueller® resilient seated non-rising stem wedge gate valves have features to make them easier to operate and to preserve the sealing capability and interior coating integrity for many years of reliable service. Manually operated, supplied with either a stem cap or a handwheel, please specify when ordering.
Type
Wedge • Resilient Seated • Non-Rising Stem
Size & Connections
DN100 to DN300 • ANSI 125 Flange (PN10/16 on request)
Duty
Water
Materials
Ductile Iron Body & Bonnet • Bronze Stem • Rubber Encapsulated Iron Disc
Pressure Rating
17 Bar
Temperature
0 to 50°C
Compliance & Approvals
UL listed • FM approved • AWWA C509 • AWWA C550
A-2361 – Ductile Iron Mueller® Gate Valve
Mueller® resilient seated non-rising stem wedge gate valves have features to make them easier to operate and to preserve the sealing capability and interior coating integrity for many years of reliable service. Manually operated, supplied with either a stem cap or a handwheel, please specify when ordering.
Type
Wedge • Resilient Seated • Non-Rising Stem
Size & Connections
DN350 to DN600 • ANSI 125 Flange (PN10/16 on request)
Duty
Water
Materials
Ductile Iron Body & Bonnet • Bronze Stem • Rubber Encapsulated Iron Disc
Pressure Rating
17 Bar
Temperature
0 to 50°C
Compliance & Approvals
UL listed • FM approved (350-400mm only) • AWWA C515 • AWWA C550
P-2462 – Ductile Iron Mueller® Gate Valve
Mueller® resilient seated non-rising stem wedge gate valves, compatible with A-20806/A-20807 & A-20814 Mueller® post indicators.
Type
Wedge • Resilient Seated • Non-Rising Stem
Size & Connections
DN100 to DN300 • ANSI 125 Flange (PN10/16 on request)
Duty
Water
Materials
Ductile Iron Body & Bonnet • Bronze Stem • Rubber Encapsulated Iron Disc
Pressure Rating
17 Bar
Temperature
0 to 50°C
Compliance & Approvals
UL listed • FM approved • AWWA/ANSI C550 • NSF 61
P-2361 – Ductile Iron Mueller® Gate Valve
Mueller® resilient seated non-rising stem wedge gate valves, compatible with A-20806/A-20807 & A-20814 Mueller® post indicators.
Type
Wedge • Resilient Seated • Non-Rising Stem
Size & Connections
DN350 to DN600 • ANSI 125 Flange (PN10/16 on request)
Duty
Water
Materials
Ductile Iron Body & Bonnet • Bronze Stem • Rubber Encapsulated Iron Disc
Pressure Rating
350-400mm: 17 Bar • 450-600mm: 12 Bar
Temperature
0 to 50°C
Compliance & Approvals
UL listed • FM approved (350-400mm only) • AWWA/ANSI C550 • NSF 61
JV060039 – Non-Rising Stem Stainless Steel Gate Valve – Flanged ANSI 150
Non-rising stem, stainless steel, full bore gate valve with a stainless seat, wedge and stem ideally suited for water distribution, gas oil, steam petrochemical, petroleum industry and various other duties.
Type
Wedge • Bolted Bonnet • Non-Rising Stem
Size & Connections
DN15 to DN150 • Flanged ANSI 150
Duty
Air • Inert Gas • Oil • Process • Steam • Water
Materials
Stainless Steel Body, Stem & Wedge • PTFE Packing
Pressure Rating
Class 150
Temperature
-20 to 220°C (dependent on pressure)
JV061008 – Stainless Steel Gate Valve DIN3202-F4 – Flanged PN16
The JV061008 is a quality stainless steel, full bore gate valve with a stainless seat, wedge and stem ideally suited for water distribution, gas oil, steam petrochemical, petroleum industry and gas duties.
Type
Wedge • Bolted Bonnet • Rising Stem
Size & Connections
DN50 to DN300 • Flanged PN16
Duty
Air • Inert Gas • Oil • Process • Steam • Water
Materials
Stainless Steel Body, Stem & Wedge • Graphite Packing
Pressure Rating
See datasheet for details
Temperature
Up to 538°C (dependent on pressure)
Compliance & Approvals
DIN3202-F4 • ATEX
F7367 – Bronze JIS 5K Marine Gate Valve
Non rising stem, metal seated gate valve to JIS 5K Japanese specifications, suitable for cold and hot water, seawater, saturated steam, oil and other neutral non aggressive liquids. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Union Bonnet • Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN15 to DN50 • JIS-5K Flange
Duty
Air • Inert Gas • Oil • Seawater • Steam • Water
Materials
Bronze Body & Bonnet • Special Brass Stem • Bronze Wedge
Pressure Rating
Up to 7 Bar (dependent on application)
Temperature
Up to 220°C
Compliance & Approvals
JIS-5K • 3.1 & 3.2 Material Certification (available on request)
F7368 – Bronze JIS 10K Marine Gate Valve
Non rising stem, metal seated gate valve to JIS 10K Japanese specifications, suitable for cold and hot water, seawater, saturated steam, oil and other neutral non aggressive liquids. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Union Bonnet • Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN15 to DN50 • JIS-10K Flange
Duty
Air • Inert Gas • Oil • Seawater • Steam • Water
Materials
Bronze Body & Bonnet • Special Brass Stem • Bronze Wedge
Pressure Rating
Up to 14 Bar (dependent on application)
Temperature
Up to 220°C
Compliance & Approvals
JIS-10K • 3.1 & 3.2 Material Certification (available on request)
F7366 – Cast Steel JIS 10K Gate Valve
Non rising stem, metal seated gate valve to JIS 10K Japanese specifications, suitable for cold and hot water, saturated steam, oil and other neutral non aggressive liquids. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Bolted Bonnet • Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN400 • JIS-10K Flange
Duty
Air • Inert Gas • Oil • Steam • Water
Materials
Cast Steel Body & Bonnet • Brass / Stainless Steel Stem • Bronze Seat & Ring
Pressure Rating
Up to 14 Bar (dependent on application)
Temperature
Up to 220°C
Compliance & Approvals
JIS-10K • 3.1 & 3.2 Material Certification (available on request)
F7363 – Cast Iron JIS 5K Gate Valve
Non rising stem, metal seated gate valve to JIS 5K Japanese specifications, suitable for cold and hot water, saturated steam, oil and other neutral non aggressive liquids. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Bolted Bonnet • Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN400 • JIS-5K Flange
Duty
Air • Inert Gas • Oil • Steam • Water
Materials
Cast Iron Body & Bonnet • Brass / St. Steel Stem • Bronze / St. Steel Seat & Ring
Pressure Rating
Up to 7 Bar (dependent on application)
Temperature
Up to 220°C
Compliance & Approvals
JIS-5K
F7364 – Cast Iron JIS 10K Gate Valve
Non rising stem, metal seated gate valve to JIS 10K Japanese specifications, suitable for cold and hot water, saturated steam, oil and other neutral non aggressive liquids. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Bolted Bonnet • Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN400 • JIS-10K Flange
Duty
Air • Inert Gas • Oil • Steam • Water
Materials
Cast Iron Body & Bonnet • Brass / St. Steel Stem • Bronze / St. Steel Seat & Ring
Pressure Rating
Up to 14 Bar (dependent on application)
Temperature
Up to 220°C
Compliance & Approvals
JIS-10K
JV060038 – Stainless Steel Uni-Directional Knife Lever Operated Gate Valve
Lever operated uni-directional wafer type knife gate valve designed with a chamfered edged polished gate to effectively cut through media with suspended solids such as wastewater, sludge, biomass, pulp and powders.
Type
Lever Operated • Uni-Directional Knife • Resilient Seated
Size & Connections
DN50 to DN300 • Wafer – Between BS4504 PN10 Flange (ANSI on request)
Duty
Water • Sludge • Pulp • Paper
Materials
Stainless Steel Body • Stainless Steel Gate & Stem • EPDM Seats (others on request)
Pressure Rating
See datasheet for details
Temperature
-35 to 120°C
Compliance & Approvals
Face to face to EN558-1
JV060037 – Cast Iron Uni-Directional Knife Lever Operated Gate Valve
Lever operated uni-directional wafer type knife gate valve designed with a chamfered edged polished gate to effectively cut through media with suspended solids such as wastewater, sludge, biomass, pulp and powders.
Type
Lever Operated • Uni-Directional Knife • Resilient Seated
Size & Connections
DN50 to DN300 • Wafer – Between BS4504 PN10 Flange (ANSI on request)
Duty
Water • Sludge • Pulp • Paper
Materials
Cast Iron Body • Stainless Steel Gate & Stem • EPDM Seats (others on request)
Pressure Rating
See datasheet for details
Temperature
-35 to 120°C
Compliance & Approvals
Face to face to EN558-1
JV060036 – Cast Iron Lever Operated Gate Valve
The JV060036 is a lever operated general purpose cast iron gate valve with PN16 flanges that offers fast opening and closing.
Type
Lever Operated • Metal Seated
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Air • Inert Gas • Oil • Water
Materials
Cast Iron Body & Bonnet • Bronze Seat • Brass Stem
Pressure Rating
10 Bar
Temperature
-10 to 150°C
Compliance & Approvals
Face to face to EN558-1
JV060033 – Rising Stem Stainless Steel Gate Valve – Flanged ANSI 150
Rising stem, stainless steel, full bore gate valve with a stainless seat, wedge and stem ideally suited for water distribution, gas oil, steam petrochemical, petroleum industry and various other duties.
Type
Wedge • Bolted Bonnet • Rising Stem
Size & Connections
DN25 to DN200 • Flanged ANSI 150
Duty
Air • Inert Gas • Oil • Process • Steam • Water
Materials
Stainless Steel Body, Stem & Wedge • PTFE Packing
Pressure Rating
Class 150
Temperature
-20 to 180°C (dependent on pressure)
JV060032 – Rising Stem Stainless Steel Gate Valve – Flanged PN16
Rising stem, stainless steel, full bore gate valve with a stainless seat, wedge and stem ideally suited for water distribution, gas oil, steam petrochemical, petroleum industry and various other duties.
Type
Wedge • Bolted Bonnet • Rising Stem
Size & Connections
DN25mm to DN200 • Flanged PN16
Duty
Air • Inert Gas • Oil • Process • Steam • Water
Materials
Stainless Steel Body, Stem & Wedge • PTFE Packing
Pressure Rating
PN16
Temperature
-20 to 180°C (dependent on pressure)
JV060030 – Forged Steel ANSI 300 Gate Valve
The JV060030 carbon steel class 300 gate valve is designed to API 602, it is suitable for high pressure and temperature duties. This valve has ANSI 300 flange connections.
Type
Wedge • Bolted Bonnet • 13% CR + HFS
Size & Connections
DN15 to DN40 • Flanged ANSI 300
Duty
Air • Inert Gas • Oil • Process • Steam • Water
Materials
Forged Steel Body & Bonnet • Stainless Steel Disc & Stem
Pressure Rating
Class 300
Temperature
-38 to 538°C (depending on pressure)
Compliance & Approvals
Class 150 • Designed to API 602
JV060029 – Forged Steel ANSI 150 Gate Valve
The JV060029 carbon steel class 150 gate valve is designed to API 602, it is suitable for high pressure and temperature duties. This valve has ANSI 150 flange connections.
Type
Wedge • Bolted Bonnet • 13% CR + HFS
Size & Connections
DN15 to DN40 • Flanged ANSI 150
Duty
Air • Inert Gas • Oil • Process • Steam • Water
Materials
Forged Steel Body & Bonnet • Stainless Steel Disc & Stem
Pressure Rating
Class 150
Temperature
-38 to 538°C (depending on pressure)
Compliance & Approvals
Class 150 • Designed to API 602
JV061014 – Cast Iron Gate Valve – Flanged ANSI 150
An economic PN16 rated cast iron, full bore gate valve with a brass seat and stem with ANSI 150 FF drilled flanges suitable for water applications.
Type
Wedge • Metal Seated • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN200 • ASA 150 Flange
Duty
Air • Inert Gas • Oil • Water
Materials
Cast Iron Body & Bonnet • Bronze Seat
Pressure Rating
PN16
Temperature
-10 to 150°C
JV061011 – UL/FM Approved Cast Iron Gate Valve
The JV061011 is a cost-effective UL/FM approved resilient seated gate valve for flow isolation duty in water fire mains. Manually operated, supplied with a handwheel.
Type
Wedge • Resilient Seated • Outside Screw & Yoke
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Water
Materials
SG Iron Body & Bonnet • Stainless Steel Stem • SG Iron + EPDM Wedge
Pressure Rating
PN16
Temperature
0 to 80°C
Compliance & Approvals
UL listed • FM approved • AWWA/ANSI C550 Coating
JV061005 – Bronze Marine Secured Bonnet Gate Valve
A marine gate valve with a secured screwed bonnet, a non-rising stem and a metal seat suitable for cold and hot water, seawater, oil and other neutral non-aggressive liquids. Lloyds, B.V., DNV, Germanischer Lloyds Inspection and 3.1 material certification can be arranged on request.
Type
Secured Screwed Bonnet • Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN15 to DN100 • PN16 Flange (others on request)
Duty
Air • Inert Gas • Oil • Seawater • Water
Materials
Bronze Body & Bonnet • Special Brass Stem • Bronze Wedge
Pressure Rating
16 Bar
Temperature
0 to 120°C
Compliance & Approvals
3.1 & 3.2 Material Certification (available on request)
JV061004 – Cast Iron Gate Valve – Flanged PN6
An economic PN10 rated cast iron, full bore gate valve with a brass seat and stem with PN6 drilled flanges ideally suited for water applications.
Type
Wedge • Metal Seated • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN200 • PN6 Flange
Duty
Air • Inert Gas • Oil • Water
Materials
Cast Iron Body & Bonnet • Brass Seat
Pressure Rating
10 Bar
Temperature
-10 to 150°C