Markets

Products A to Z

Gas Valves

Johnson Valves offer a range of gas service valves including ball, gate and butterfly valves conforming and approved to various standards.

JV090001 – Brass Nickel Plated Ball Valve

WRAS approved for water duty and BSI EN 331 for gas service (Derby range). Manually operated, supplied with a yellow lever.

Type
Two-Piece • Full Bore • Lever Operated
Size & Connections
6mm (1/4″) to 100mm (4″) BSP Female
Duty
Air • Gas • Oil • Water
Materials
Nickel Plated Brass Body • PTFE Seat • Chrome Plated Brass Ball
Pressure Rating
6-15mm PN40 • 20-25mm PN32 • 32-65mm PN25 • 80-100mm PN16
Temperature
Liquids: -20°C to 110°C • Gas: -20°C to 70°C (Dependent on pressure)
Compliance & Approvals
WRAS* • BSI Gas Approved to BS EN 331*  (*6-50mm only)
Buy JV090001 - Brass Nickel Plated Ball ValveJV090001 - Brass Nickel Plated Ball Valve - PDF DatasheetWRAS Approved ProductBSI EN331 Gas Approved Product

JV090001 - Brass Nickel Plated Ball Valve

JV090026 – BSI EN331 Gas Approved Ductile Iron Ball Valve, Flanged PN16 – ISO 5211 Direct Mount

A BSI EN331 gas approved, ductile iron full bore ball valve particularly suitable for gas duties but can be used for other duties. Supplied with a manual lever, can be supplied complete with an electric or pneumatic actuator.

Type
Two-Piece • Full Bore
Size & Connections
DN15 to DN200 • PN16 Flange
Duty
Air • Gas • Oil • Water
Materials
Ductile Iron Body • Brass Ball & Stem • RPTFE Seat
Pressure Rating
PN16
Temperature
-10°C to 70°C
Compliance & Approvals
BSI EN331
Contact UsJV090026 – BSI EN331 Gas Approved Ductile Iron Ball Valve, Flanged PN16 - ISO 5211 Direct Mount - PDF DatasheetBSI EN331 Gas Approved Product

JV090026 – BSI EN331 Gas Approved Ductile Iron Ball Valve, Flanged PN16 - ISO 5211 Direct Mount

JV090025 – BSI EN331 Gas Approved Ductile Iron Ball Valve, Flanged PN16

A BSI EN331 gas approved, ductile iron full bore ball valve particularly suitable for gas duties but can be used for other duties. Supplied with a manual lever up to DN150 and a gearbox with handwheel from DN200.

Type
Two-Piece • Full Bore
Size & Connections
DN25 to DN300 • PN16 Flange
Duty
Air • Gas • Oil • Water
Materials
Ductile Iron Body • Stainless Steel Ball & Stem • PTFE Seat
Pressure Rating
PN16
Temperature
-20°C to 60°C
Compliance & Approvals
BSI EN331
Contact UsJV090025 – BSI EN331 Gas Approved Ductile Iron Ball Valve, Flanged PN16 - PDF DatasheetBSI EN331 Gas Approved Product

JV090017 – BSI EN331 Gas Approved Ductile Iron Ball Valve, Flanged PN16

JV100050 – BSI Gas Approved Ductile Iron Lugged & Tapped Butterfly Valve, NBR Lined

BSI gas approved butterfly valve with an NBR liner, lugged and tapped to PN16. Manually operated, supplied with a lockable lever.

Type
Lugged & Tapped
Size & Connections
DN50 to DN250 • Wafer – PN16 Flange
Duty
Gas
Materials
Epoxy Coated Ductile Iron Body • Stainless Steel Disc • NBR Liner
Pressure Rating
PN16
Temperature
-20°C to 100°C
Compliance & Approvals
BSI Gas Approved • M9 Specifications T/SP/PRS/38
Contact UsJV100050 – BSI Gas Approved Ductile Iron Lugged & Tapped Butterfly Valve, NBR Lined - PDF DatasheetISO5211 Pad Mount

JV100050 – BSI Gas Approved Ductile Iron Lugged & Tapped Butterfly Valve, NBR Lined

JV060026 – Ductile Iron Gas Approved Gate Valve

This gas approved ductile iron gate valve has an NBR encapsulated wedge, conforming to GIS / BIS V7-1:2007 and EN13774. This valve is supplied with a stem cap top and handwheel.

Type
Wedge • Inside Screw & Non-Rising Stem
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Gas
Materials
Ductile Iron Body • NBR Encapsulated Wedge • Stainless Steel Stem • NBR Seals
Pressure Rating
PN7
Temperature
-20 to 60°C
Compliance & Approvals
GIS / BIS V7-1:2007 • EN13774 • Face to face to EN558-1, 1986 Table 3
Contact UsJV060026 – Ductile Iron Gas Approved Gate Valve - PDF Datasheet

JV060026 – Ductile Iron Gas Approved Gate Valve

JV060027 – Ductile Iron Gas Approved Double Block & Bleed Gate Valve

This gas approved ductile iron double block and bleed gate valve has an NBR encapsulated wedge, conforming to GIS / BIS V7-1:2007 and EN13774. This valve is supplied with a stem cap top and handwheel.

Type
Double Block & Bleed
Size & Connections
DN50 to DN300 • PN16 Flange
Duty
Gas
Materials
Ductile Iron Body • NBR Encapsulated Wedge • Stainless Steel Stem • NBR Seals
Pressure Rating
PN7
Temperature
-20 to 60°C
Compliance & Approvals
GIS / BIS V7-1:2007 • EN13774 • Face to face to EN558-1, 1986 Table 3
Contact UsJV060027 – Ductile Iron Gas Approved Double Block & Bleed Gate Valve - PDF Datasheet

JV060027 – Ductile Iron Gas Approved Double Block & Bleed Gate Valve

030 – Asco Gas Solenoid Valve – 2/2 Normally Closed

The 030 British Gas & European Gas brass solenoid valve is manufactured to a high standard by Asco. It is direct operated and therefore requires no minimum operating pressure.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Operated (No min. pressure required)
Size & Connections
10mm (3/8″) to 15mm (1/2″) BSP Female
Duty
Gas Service
Materials
Brass Body & Seat • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 480 millibar (dependent on size) • 0 to 60°C
Voltage
AC : 230V (50 Hz)
Compliance & Approvals
British Gas • EN 161 • IEC 335 • IP65
Part Numbers
EGSCE030B010 • EGSCE030A016
Contact UsAsco 030 - Gas Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 030 - Gas Solenoid Valve - 2/2 Normally Closed

040 – Asco Gas Solenoid Valve – 2/2 Normally Closed

The 040 British Gas & European Gas aluminium solenoid valve is manufactured to a high standard by Asco. It is direct operated and therefore requires no minimum operating pressure.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Operated (No min. pressure required)
Size & Connections
10mm (3/8″) to 40mm (1 1/2″) BSP Female
Duty
Gas Service
Materials
Aluminium Body & Seat • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 140 millibar (dependent on size) • 0 to 60°C
Voltage
AC : 24V • 48v • 115V • 230V (50 Hz)
Compliance & Approvals
British Gas • EN 161 • IEC 335 / CEE-10 • IP65 / IP41
Part Numbers
EGSCE040B001 • EGSCE040B002 • EGSCE040B003 • EGSCE040B024
 
EGSCE040B25 • EGSCE040B26
Contact UsAsco 040 - Gas Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 040 - Gas Solenoid Valve - 2/2 Normally Closed

262 – Asco Gas Solenoid Valve – 2/2 Normally Closed

The 262 British Gas & European Gas brass solenoid valve is manufactured to a high standard by Asco. It is direct operated and therefore requires no minimum operating pressure.  This two way valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Operated (No min. pressure required)
Size & Connections
4mm (1/8″) to 6mm (1/4″) BSP Female
Duty
Gas Service
Materials
Brass Body & Seat • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 2.76 Bar (dependent on size) • 0 to 60°C
Voltage
AC : 24V • 48v • 115V • 230V (50 Hz)
Compliance & Approvals
British Gas • EN 161 • IEC 335 • IP65
Part Numbers
EGSCE262C002 • EGSCE262C090
Contact UsAsco 262 - Gas Solenoid Valve - 2/2 Normally Closed - PDF DatasheetManufactured by Asco

Asco 262 - Gas Solenoid Valve - 2/2 Normally Closed

JV230002 – Gas Solenoid Valve – 2/2 Normally Closed – Flanged PN16

The JV230002 is a Class “A” gas solenoid valve suitable for gas in gas power burners, atmospheric gas boilers, industrial ovens and other gas consuming appliances. Supplied with an incorporated mesh filter and has test point connections on the inlet and outlet for CPI switch, pressure gauges etc. The valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
DN65 to DN200 • Flanged PN16
Duty
Gas Service
Materials
Aluminium Body (DN125-200 Steel) • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 360 mbar • Ambient: -15 to 60°C
Voltage Options
AC : 24, 110V, 230V (50/60 Hz) • DC : 12V, 24V
Compliance & Approvals
Class “A” BS EN161 • British Gas & EU Standards 90/396/EEC, 73/23/EEC, 89/336/EEC
Contact UsJV230002 - Gas Solenoid Valve - 2/2 Normally Closed - Flanged PN16 - PDF Datasheet

JV230002 - Gas Solenoid Valve - 2/2 Normally Closed - Flanged PN16

JV230001 – Gas Solenoid Valve – 2/2 Normally Closed – Threaded

The JV230001 is a Class “A” gas solenoid valve suitable for gas in gas power burners, atmospheric gas boilers, industrial ovens and other gas consuming appliances. Supplied with an incorporated mesh filter and has test point connections on the inlet and outlet for CPI switch, pressure gauges etc. The valve is normally closed and energised to open.

Type
2/2 • Normally Closed • Direct Acting (No minimum pressure required)
Size & Connections
10mm (3/8″) to 80mm (3″) BSP Female
Duty
Gas Service
Materials
Aluminium Body • Stainless Steel Internals • NBR Seals & Gaskets
Pressure & Temperature Range
0 to 360 mbar • Ambient: -15 to 60°C
Voltage Options
AC : 24, 110V, 230V (50/60 Hz) • DC : 12V, 24V
Compliance & Approvals
Class “A” BS EN161 • British Gas & EU Standards 90/396/EEC, 73/23/EEC, 89/336/EEC
Contact UsJV230001 - Gas Solenoid Valve - Normally Closed - Direct Acting - PDF Datasheet

JV230001 - Gas Solenoid Valve - Normally Closed - Direct Acting