Float (Ball) Valves
Equilibrium pattern float (ball) valves for water tanks with flanged and screwed connections.
901 – Pegler Equilibrium Float Valve, WRAS Approved
Robustly manufactured equilibrium pattern tank float valve that is designed to minimise the effect of changing water pressures. The line pressure assists closing thus reducing the length of lever required.
Type
Equilibrium • Reduced Bore
Size & Connections
15mm (1/2″) to 100mm (6″) BSP Male
Duty
Water
Materials
Brass Body (15 – 25mm) • Bronze Body (32 – 150mm) • EPDM Piston Washer
Pressure Rating
14 Bar (15 – 25mm) • 10 Bar (32 – 150mm)
Temperature
0 to 85°C
Compliance & Approvals
WRAS
Please Note : 901 Float Valve is supplied without float, suitable floats below
Part No. JV110004
Copper Float 4½” to 16″ Diameter
Part No. JV110005
Plastic Float 4½” to 12″ Diameter
JV110002 – Stainless Steel Float Valve c/w Float
A quality stainless steel tank float valve suitable for various duties complete with float.
Type
Float
Size & Connections
10mm (3/8″) to 65mm (2 1/2″) BSP Threaded • DN80 & DN100 PN10/16 Flanged
Duty
Fluids compatible with materials
Materials
Stainless Steel Body & Float • Silcone Sealings
Pressure Rating
10 Bar
Temperature
0 to 150°C
JV110006 – Cast Iron Straight Float Valve c/w Float – Flanged PN16
The JV110006 is an economical cast iron straight float valve suitable for water and neutral fluids that are compatible with the materials.
Type
Straight Pattern
Size & Connections
DN50 to DN200 • PN16 Flange
Duty
Water
Materials
Cast Iron Body • EPDM Seals
Pressure Rating
10 Bar
Temperature
-10 to 90°C (dependent on pressure)
Compliance & Approvals
Leakproof class A according to EN 12266-1 • EN 1092-2 face to face
JV110007 – Cast Iron Angled Float Valve c/w Float – Flanged PN16
The JV110007 is an economical cast iron angled float valve suitable for water and neutral fluids that are compatible with the materials.
Type
Straight Pattern
Size & Connections
DN50 to DN200 • PN16 Flange
Duty
Water
Materials
Cast Iron Body • EPDM Seals
Pressure Rating
10 Bar
Temperature
-10 to 90°C (dependent on pressure)
Compliance & Approvals
Leakproof class A according to EN 12266-1 • EN 558 series 8 face to face
501 – Cast Iron Float Valve c/w Float, WRAS Approved
The 501 cast iron* float valve is an equilibrium pattern, designed to minimise the effect of changing water pressures. The line pressure assists closing thus reducing the length of lever required.
Type
Equilibrium
Size & Connections
DN50 to DN300 • PN10/16 Flange (undrilled and others on request)
Duty
Water
Materials
Cast Iron Body (50 – 150mm) • Ductile Iron Body (200 – 300mm) • EPDM Piston Seal
Pressure Rating
10 Bar
Temperature
0 to 70°C (dependent on pressure)
Compliance & Approvals
WRAS (50 – 200mm only)